Aluminium Spinner Removal Tool

Moderator: Art1012

Trekie
Posts: 3
Joined: Tue Oct 02, 2018 4:27 pm

Aluminium Spinner Removal Tool

Postby Trekie » Sun Nov 25, 2018 8:18 pm

Hi Guys,
Can you help, does any one know where I could purchase an Aluminium Spinner Removal Tool.
I have looked at the Oldtimers removal tool but thought it was rather expensive.
Thanks
Trekie

Speediejag
Posts: 2
Joined: Mon Aug 20, 2018 2:16 pm

Re: Aluminium Spinner Removal Tool

Postby Speediejag » Tue Nov 27, 2018 3:25 am

Like you, I didn't want to be swinging a hammer close to my fenders. I was referred to Lionel based in the UK who only makes 2 tools per week to supplement his pension. It cost about 70 pounds. His email is [email protected]. Send him an email and he will put you in the production que, provide instructions and sizes. He makes the aluminum removal tool in 3 diameter options based on the diameter of your spinners. Be sure to measure all four spinners. I received the tool in about a month and it's great. I use a bar/torque wrench, an extension bar and a socket to safely remove or tighten my spinners.

Happy motoring, SpeedieJag

Trekie
Posts: 3
Joined: Tue Oct 02, 2018 4:27 pm

Re: Aluminium Spinner Removal Tool

Postby Trekie » Wed Nov 28, 2018 11:48 pm

Thanks for the information, I shall contact Lionel.

User avatar
iRS
Posts: 134
Joined: Fri Apr 01, 2016 3:24 pm
Location: Aberdeenshire
Contact:

Re: Aluminium Spinner Removal Tool

Postby iRS » Thu Nov 29, 2018 8:29 am

I'm intrigued by this. Ii would be interesting to see a photo. Would that be possible?
Roger S
Aberdeenshire
XJS FORUM ASSISTANT COORDINATOR

Early E
1976 XJ-S - original factory manual. Currently in many pieces.
X350 - 2005 Super V8
1962 MGB

Speediejag
Posts: 2
Joined: Mon Aug 20, 2018 2:16 pm

Re: Aluminium Spinner Removal Tool

Postby Speediejag » Fri Nov 30, 2018 5:50 am

Sure. Here are two pictures. I initially saw the product and got Lionel's information from a davejaguar66 video on YouTube. Very good channel. Good luck, James in California.
Attachments
IMG_0592.jpg
IMG_0591.jpg

User avatar
iRS
Posts: 134
Joined: Fri Apr 01, 2016 3:24 pm
Location: Aberdeenshire
Contact:

Re: Aluminium Spinner Removal Tool

Postby iRS » Thu Dec 06, 2018 1:54 pm

Many thanks. I think I'll get in the queue.
Roger S
Aberdeenshire
XJS FORUM ASSISTANT COORDINATOR

Early E
1976 XJ-S - original factory manual. Currently in many pieces.
X350 - 2005 Super V8
1962 MGB


Who is online

Users browsing this forum: No registered users and 2 guests