engine management light

Moderator: steveisleofwight

korky13
Posts: 1
Joined: Thu Feb 07, 2019 8:12 pm

engine management light

Postby korky13 » Thu Feb 07, 2019 8:23 pm

My garage and myself can not turn off the engine management light. The error said it was the oxygen sensor.So two new ones where fitted. The garages computer says there is no fault on the vehicle now. But can not erase an old fault . please help this is driving me crazy

User avatar
J44EAG
Posts: 5526
Joined: Sat Oct 20, 2007 9:57 pm
Location: Warlingham Surrey/Faversham Kent

Re: engine management light

Postby J44EAG » Thu Feb 07, 2019 8:33 pm

Try a battery disconnect for at least twenty minutes. Sometimes codes can be hard to erase and "hard dumping" is the only way to clear things down. If the code remains, you perhaps then have to look further.

Make sure you know the radio code before disconnection. You will also have to reset the clock.

See how you get on and please let us know the result.

Mike K
X350 Co-ordinator

2004 XJR


Who is online

Users browsing this forum: No registered users and 3 guests