Vehicle Registration plate

Moderators: Aceman, ecosselynx

richard4951
Posts: 2
Joined: Wed May 13, 2009 9:48 pm

Vehicle Registration plate

Postby richard4951 » Wed May 13, 2009 10:04 pm

my car's vehicle reg plate usually found on inner wing is missing. it was not there in 1983 when I bought car , I believe the car had a new wing fitted in the past and it was presumably never replaced. I have the original log book etc so believe the car to be genuine. How do I go about obtaining a replacement plate complete with chassis number etc stamped on. I purchased a blank plate at a spares day but don't know the official way of getting it stamped.

velosolex50
Posts: 5
Joined: Fri Mar 16, 2007 8:31 pm
Location: isle of man

Postby velosolex50 » Mon Jun 01, 2009 10:38 pm

Find someone with a set of letter / number punches & just do it.....there is no hallmark or seal! :D

suarthardy
Posts: 488
Joined: Thu May 14, 2009 8:56 pm
Location: North Shropshire

Postby suarthardy » Fri Jun 05, 2009 6:06 pm

Hi Richard

Most engineering shops will have a set of stamps but if you don't know anybody then you'll probaly have to pay the going workshop charge rate, which is usually a lot less than garages and main dealers charge.

If you feel like doing it yourself Screwfix sell a set of 4 mm high letter and number stamps for £12.26. You probably couldn't do a worse job than whoever stamped my Daimler's plate in 1969.

Good Luck

Stuart

richard4951
Posts: 2
Joined: Wed May 13, 2009 9:48 pm

Postby richard4951 » Fri Jun 05, 2009 6:50 pm

many thanks to both for your advice, I will have a go myself
Richard


Who is online

Users browsing this forum: No registered users and 2 guests